CSTS

Construction Safety Training System is a computer-based certification on basic knowledge of safety in the construction industry. Upon completing the certification, you receive the certificate which you are expected to keep with you at all times. You must present the certificate to obtain entry to jobs in Alberta. You may be asked to present the certificate at any time while at the job site. Failure to produce a current, valid CSTS certificate is grounds for dismissal. Please note: If you took CSTS before January 1, 2004, your certification has expired and you need to recertify before returning to work. If you took CSTS on or after January 1, 2004, you are no longer required to recertify every three years.

Local 110 members can recertify for free by calling Paige at the Hall ((780) 426-2874, ext 233) to arrange for an appointment. Appointments are available for 9 A.M. and 1 P.M. for recertifications. If you miss your appointment, you will be assessed a $40 fine. Local 110 strives to notify members in advance of the expiration date of all current CSTS certifications. Failure to receive notice does not relieve you of the obligation to recertify.

Non-members must call Paige at the Hall ((780) 426-2874, ext 233) and arrange for appointments and pre-payment of the non-refundable $40 fee. Payment can be made by money order (through the mail) or by cash or debit card (in person at the Hall). Appointments for first-time certifications are available for 9 A.M. If you miss your appointment, the $40 fee is not refunded.

Back to Top

TRAINING TRUST FUND

Ron Milich is our Training Coordinator. Local 110's Training Centre at 9407- 47 St. is located one block north of the Union Hall in the Lampton Industrial Park.The contact numbers are (phone) 780-440-6832 and (fax) 780-440-4796.

Attention all members in Manitoba: There will be a presentation of the Professional Craftsman Code of Conduct Program at Room #1 in the Restaurant at Canad Inns, 2100 McPhillips Street, Winnipeg, on July 29, 2007 starting at 9:00 A. M. sharp. To attend, you must regiater with Local 99's Union Hall by calling (204) 694-0726. Local 99 will accept affiliated Local Union Members working or living in Manitoba.

Asbestos Abatement and Removal (16 hours)

Any member requiring certification can receive reimbursable training through the Training Trust Fund. Those members who received their certification prior to January 1, 2004 and have no expiration date on their certificates will be required to recertify by December 31, 2006.All certificates issued before January 1, 2004 will be invalid after December 31 of this year. We are trying to make arrangements for group recertification review and exam sessions later this year. The recertification costs are reimbused by the Fund. Watch this space for updates. Call Ron for details.

Back to Top

Fall Protection (8 hours)

All workers going to Syncrude, Suncor, Albian Sands, or CNRL Horizon are required to have the Oil Sands Safety Association-accredited Fall Protection training. The contractors are obligated to provide this training when you arrive on the site if you do not already have an OSSA approved certificate. Any member who wishes to take the OSSA accredited training on their own time can do so and be reimbursed for the cost of the course only. This is available in Edmonton, Calgary and Ft.McMurray.Contact Ron at the Training Centre for details.

Aerial Work Platforms (8-9 hours)

This course also requires all new referrals or transfers after April 1, 2006 to the plants mentioned above to have training done by an OSSA accredited trainer.Local 110 teach the Touchback Safety AWP program. Touchback have had their course approved by OSSA, but current holders of a Touchback certificate may be required to attend the OSSA accredited course before operating a scissors lift or boom lift on the OSSA regulated sites.The contractors will bear all costs on site for any additional training required to meet OSSA standards. Any member who wishes to receive AWP training on their own time can contact Ron for more information. We can arrange a class if we have at least six members or we can make individual arrangements as needed.

First Aid Training -- Emergency ( 8 hours ) or Standard with CPR ( 15 hours )

The one day or two day courses through either the Canadian Red Cross or St. John's are covered by the Training Trust Fund. This is available in Edmonton, Calgary and Ft. McMurray. Call Ron at the Training Centre for details.

COAA Alcohol and Drug Policy Training (4 hours)

This is the Canadian Model for Providing a Safe Workplace developed by the Construction Owners Association of Alberta. The Alberta Building Trades Council endorsed the original program when it first appeared in 1999 and it became part of our Collective Agreements. The COAA has amended the program and introduced changes that were unanimously rejected by the Building Trades last December. The COAA still plan to administer the program with the new changes and have more or less told the Building Trades to use the grievance procedure to oppose any part we don't agree with.They have finally made available the new material to us but all Trainers have to complete an update course before presenting it to the membership. We plan to start offering this training by the beginning of June. Check this space for updates.

Back to Top

Apprentice Tuition Fees and/Textbook Fees/Travel Expenses

All union apprentices taking apprenticeship training at NAIT are eligible for these monies. Contact the Dispatch Desk (780) 426-2874 extension 230.

H2S Alive (6-8 hours)

Training can be arranged for those members desiring to take this course in Edmonton, Calgary and Ft. McMurray.

Better SuperVision Program

Job Specific Courses

Some training that may be require by a contractor for a specific job MAY be covered by the Training Trust Fund, for example Confined Space Entryand Awareness, Fire Safety, Swing Stages, WHMIS etc. Call Ron at the Training Centre for details.

Back to Top

Job Steward Training Level I (8 hours)

All Job Stewards and Alternates should take this training. It is available on an as-needed basis or through prior arrangement with Ron.One on one training to accomodate particular days off is available. This course is available in Edmonton,Calgary and Ft. McMurray.This course is available to any mechanic member who desires to serve his or her union brothers and sisters. All are encouraged to attend and get involved.Call Ron for more information or to arrange a class.

Pattern Development and Upgrading

We will shortly be making the Training Centre available to members who wish to upgrade or renew their pattern development and layout skills. You will be able to view CD-Rom's to guide you in all the layouts we use most frequently on the job, lay them out on paper and then transfer them to metal and install on a pipe rack.

For more information on any of the courses listed call Ron Milich at 780-440-6832 or 780-719-6089. Leave a message if there is no answer and your call will be returned as soon as possible.

Back to Top

U.S. Journeyman Insulators Jobs recorded on the Dispatch Information page. For specific information NOT covered on this website such as benefit status, CSTS appointments, how to become an insulator, etc. : Call (780) 426-2874 or (403) 243-1234 Business Manager:  Bill Spring  (780) 426-2874 Business Agents, North:  Reg Gravelle, Ron Stock  (780)426-2874 Business Agent, South: Tom Chapple (403) 243-1234 International Vice President: Anthony Ceraldi

Return to the top of this page.
You are at Local 110's Home Page, last updated 2008-01-23.